Awards

得獎記錄 (2011~) / Award list since 2011

  • 2018: 碩士生謝志青獲2018日本機構學研討會Finalist of Young Investigator Fund Best Paper Award
    2018: Chih-Ching Hsieh, Finalist of Young Investigator Fund Best Paper Award, 2018 Japan Symposium on Thoery of Machines and Mechanisms, Tokyo, Japan
  • 2017: 專題生管軒屏獲2017台灣智慧型機器人研討會最佳學生論文競賽佳作
  • 2016: 畢業生劉廷皓獲第13屆上銀機械碩士論文獎銀質獎
    2016: Ting-Hao Liu, Sliver Award, 2017 HIWIN Master Thesis Award, Taiwan
  • 2016: 本實驗室與中央大學以及林口長庚醫院團隊獲2016長庚醫療機器人大賽季軍。
    2016: 3rd Place, CGMH Medical Robot Competition, Taiwan
  • 2016: 碩士生洪于珺獲中華民國機構與機器原理學會105年度傑出碩士論文獎
    2016: Yu-Chun Hing, Excellent MSc Thesis Award, Chinese Society of Mechanism and Machine Theory, Taiwan
  • 2016: 專題生張岱蓉獲機械系104學年度最佳專題獎,專題名稱:「脊椎咬骨鉗的改良設計(Improvement Design of Kerrison Bone Punches)」
    2016: Tai-Jung Chang, Best Undergraduate Project Award, Department of Mechanical Engineering, Taiwan Tech
  • 2015: 專題生管軒屏獲2015美國機械工程師學會機構與機器人設計競賽大專組第2名,獲獎作品名稱:「Mechanism Design of a New Brain Retractor for Robotic Neurosurgery」
    BSc project student Hsuan-Ping Kuan won the 2nd Place (Undergraduate Division) in 2015 ASME Student Mechanism and Robot Design Competition for his project titled ”Mechanism Design of a New Brain Retractor for Robotic Neurosurgery”
  • 2015: 專題生陳宥升蔡旭凱獲機械系103學年度最佳專題獎,專題名稱:「平板電腦旋轉式彈簧支架之創新設計」
    2015: You-Shen Chen & Shu-Kai Tsai, Best Undergraduate Project Award, Department of Mechanical Engineering, Taiwan Tech
  • 2014: 畢業生曾子瑜獲第11屆上銀機械碩士論文獎傑出創作獎
    2014: Tzu-Yu Tseng, Excellent Creation Award, 2014 HIWIN Master Thesis Award, Taiwan
  • 2014: 碩士生吳炳煬榮獲臺灣機器人學會103碩士論文獎優等獎
    2014: Ping-Yang Wu, Merit Master Thesis Award, 2014 Robotics Society of Taiwan, Taiwan
  • 2014: 碩士生曾子瑜獲第十六屆全國創新機構設計比賽「銀牌獎」(作品名稱:G-Free—抗重力雙姿態下肢癱瘓病患肌力訓練輔助器)
    2014: Tzu-Yu Tseng, Silver Medal, The 16th Taiwan Innovative Mechanism Design Competition, Taiwan
  • 2014: 碩士生吳炳煬郭進星教授投稿論文獲第十七屆全國機構與機器設計學術研討會「最佳論文獎」「曾錦煥教授紀念論文獎」 (論文名稱:新型微創手術並聯式全解耦機器人之機電整合與實驗測試)
    2014: Ping-Yang Wu & Chin-Hsing Kuo, Best Paper Award & Professor Ching-Huan Tseng Memorial Award, The 17th National Conference on Mechanisms and Machine Design, 14 November 2014, Taichung, Taiwan.
  • 2014: Professor Chin-Hsing Kuo and Mr. Shao-Jung Lai received the Freudenstein/General Motors Young Investigator Award at The 38th Mechanisms and Robotics Conference in ASME IDETC 2014.
  • 2014: Two papers received the Best Paper Award from the 3rd IFToMM Asian Conference on Mechanism and Machine Science (Asian MMS), 9-10 July 2014, Tianjin, China
  • 2014: Prof. Chin-Hsing Kuo received the 2014 Excellent Young Investigator Research Grant from Ministry of Science and Technology, Taiwan
  • 2014: 碩士生吳炳煬獲2014臺灣智慧型機器人研討會「最佳學生論文獎」第一名
  • 2014: 大學部專題生管軒屏獲103年度科技部大專生專題研究計畫補助
  • 2013: 畢業生賴紹榕獲第十屆上銀機械碩士論文獎科技大學特別獎
  • 2013: Prof. Chin-Hsing Kuo received 2013 Young Investigator Award from Taiwan Tech (台科大102學年度年輕學者研究獎助)
  • 2013: 畢業生李高逵獲中國機械工程學會102年度 碩士論文獎佳作
  • 2013: 畢業生蘇俊瑋獲中華民國機構與機器原理學會102年度 傑出碩士論文獎
  • 2013: 專題生修偉翔許峯旗黃晟瑜獲國立臺灣科技大學101年度機械工程系 最佳專題獎
  • 2013: 郭進星教授獲台灣區機器工業同業工會機械業產學貢獻獎
  • 2012: 畢業生連望甯獲中國機械工程學會101年度 碩士論文獎佳作
  • 2012: 畢業生張隆裕獲中華民國機構與機器原理學會101年度 優秀碩士論文獎
  • 2012: 專題生邱威哲邱欣榆與研究生何惠雯獲中華民國生物醫學工程創意競賽 鐿鈦技術獎
  • 2012: 大學部專題生修偉翔獲101年度國科會大專生專題研究計畫補助
  • 2012: Prof. Chin-Hsing Kuo and Lung-Yu Chang received Honorable Mentioned Paper Award from The 2nd ASME/IFToMM International Conference on Reconfigurable Mechanisms and Robots (ReMAR 2012), 9-11 July 2012, Tianjin, China
  • 2011: Prof. Chin-Hsing Kuo received the IFToMM Young Delegates Travel Grant from IFToMM for attending The 13th World Congress in Mechanism and Machine Science, 19-23 June 2011, Guanajuato, México.


2018 Jc-IFToMM Finalist of Young Investigator Fund Best Paper Award

JcIFToMM評審委員頒獎,謝志青領獎

恭喜本實驗室研究生謝志青榮獲The 24th Japan Symposium on Theory of Machines and Mechanisms (Jc-IFToMM 2018) Finalist of Young Investigator Fund Best Paper Award,得獎論文為:「A 7R Linkage for Ankle Rehabilitation: Kinematics and Force Analyses」。(2018/06/01)

Congratulations to our lab member, Mr. Chih-Ching HSIEH, on his achievement of receiving the Finalist of Young Investigator Fund Best Paper Award from 2018 JcIFToMM The 24th Japan Symposium on Theory of Machines and Mechanisms (Jc-IFToMM 2018) for his paper entitled “A 7R Linkage for Ankle Rehabilitation: Kinematics and Force Analyses.” (2018/06/01)

【得獎作品介紹】與【頒獎典禮照片】

2016 第13屆上銀機械碩士論文獎「銀質獎」

行政院林全院長頒獎,劉廷皓郭進星教授共同領獎

恭喜本實驗室畢業生劉廷皓榮獲第13屆上銀機械碩士論文獎銀質獎,得獎論文為:「新型腹腔鏡機器人手術器械系統」。(2017/03/25)

Congratulations to our lab alumni, Mr. Ting-Hao Liu, on his achievement of receiving the Silver Award from the 2016 HIWIN Master Thesis Award for his thesis entitled “A Novel Robotic Laparoscopic Instrument System” (2017/03/28)

【得獎作品介紹】與【頒獎典禮照片】

2016 長庚醫療機器人大賽 季軍

本實驗室郭進星教授與中央大學及林口長庚醫院團隊,以「整合鑽孔切削功能之開顱手術裝置」作品參加2016長庚醫療機器人大賽,榮獲季軍,獎金20萬元。
Led by Professor Chin-Hsing Kuo, the team from Taiwan Tech, National Central University, and Chang Gang Memorial Hospital (CGMH) won the 3rd place in the 2016 CGMH Medical Robot Competition for their design about a novel integrated drilling-and-sawing device for craniotomy.

得獎公告
郭進星教授與中央機械系Terence Essomba教授

















2016 機構學會「傑出碩士論文獎」

洪于珺同學獲2016機構學會「傑出碩士論文獎」(攝於2016機構學會年會)

恭喜本實驗室畢業生洪于珺榮獲2016中華民國機構與機器原理學會傑出碩士論文獎,得獎論文為:「以Cardan齒輪機構為基礎之創新重力平衡器設計」。(2016/10/28)

Congratulations to our lab alumni, Ms. Yu-Chun Hung, on her achievement of receiving the 2016 Excellent MSc Thesis Award from the Chinese Society of Mechanism and Machine Theory for her thesis entitled “Design of a Novel Gravity Balancer Based on Cardan Gear Mechanism.” (2016/10/28)




2015 ASME Student Mechanism & Robot Design Competition (2nd Place in Undergraduate Division)

管軒屏獲獎

本實驗室專題生管軒屏以專題作品“Mechanism Design of a New Brain Retractor for Robotic Neurosurgery“參加2015年8月3-4日於美國波士頓(Boston, MA, USA)舉辦之2015美國機械工程師學會機構與機器人設計學生競賽,榮獲大專組第2名 (2nd Place in Undergraduate Division)!軒屏的專題作品提出一種創新、可調整撐開距離與角度的大腦撐開器,此發明可協助醫生更方便進行腦神經手術。(2015/08/04)

【得獎作品介紹】與【比賽照片】

Congratulations to our BSc project student Hsuan-Ping Kuan in winning the 2nd Place (Undergraduate Division) in 2015 ASME Student Mechanism and Robot Design Competition, which was held from 3-4 August 2015 in Boston, MA, USA. Hsuan-Ping's awarded project is titled ”Mechanism Design of a New Brain Retractor for Robotic Neurosurgery,” which proposes a novel brain retractor with adjustable retraction distance and angle in decoupled motion. (2015/08/04)

<Competition and award photos>

2015 上銀機械碩士論文獎「傑出創作獎」

行政院顏鴻森政務委員頒獎,曾子瑜與郭進星教授、許維君教授共同領獎

恭喜本實驗室畢業生曾子瑜榮獲2015上銀機械碩士論文獎傑出創作獎,得獎論文為:「抗重力雙姿態下肢癱瘓病患肌力訓練輔助器之設計與測試評估」。(2015/03/28)

Congratulations to our lab alumni, Mr. Tzu-Yu Tseng, on his achievement of receiving the Excellent Creation Award from the 2015 HIWIN Master Thesis Award for his thesis entitled “Design and Experimental Evaluation of a Gravity-Free Dual-Posture Muscle Training Assistive Device for Lower Limb Paralysis Patients.” (2015/03/28)

【得獎作品介紹】與【頒獎典禮照片】

2014 台灣機器人學會碩士論文獎「優等獎」

恭喜本實驗室畢業生吳炳煬榮獲臺灣機器人學會103碩士論文獎優等獎,得獎論文為:「新型微創手術並聯式全解耦機器人之機電系統設計與實作」。(2014/12/30)

Congratulations to our lab alumni, Mr. Ping-Yang Wu, who received the 2014 Merit Master Thesis Award from the Robotics Society of Taiwan for his thesis entitled “Design and Implementation of the Mechatronic System of a New Fully Decoupled Parallel Robot for Minimally Invasive Surgery.” (2014/12/30)

2014 全國機構與機器設計學術研討會「最佳論文獎」

機構學會理事長蔡得民教授頒發曾錦煥教授紀念論文獎

本實驗室投稿了三篇論文至2014年11月14日於台中勤益科技大學舉辦之第十七屆全國機構機器設計學術研討會,其中「新型微創手術並聯式詮解耦機器人之機電整合與實驗測試」一文榮獲大會「最佳論文獎」「曾錦煥教授紀念論文獎」。此外,本研究室曾子瑜同學之作品:「G-Free-抗重力雙姿態下肢癱瘓病患肌力訓練輔助器」亦獲得了第十六屆全國創新機構設計比賽「銀牌獎」的佳績,於大會中獲頒獎狀與獎金10萬元!

在參與研討會的過程中,同學們參觀了其他相關機構領域的成果發表,增廣眼界,並了解機構學術與市場的關係狀況。

得獎論文
吳炳煬、郭進星,「新型微創手術並聯式全解耦機器人之機電整合與實驗測試」,第十七屆全國機構與機器設計學術研討會,2014年11月14日,國立勤益科技大學,台中市。

2014 Freudenstein/General Motors Young Investigator Award

Professor C.-H. Kuo received the award plaque from Professors Pierre Larochelle and Alexander H. Slocum at ASME IDETC 2014 (photo courtesy: Prof. Just Herder)

本實驗室郭進星教授與賴紹榕同學參加2014年8月17-20日於美國紐約州水牛城舉辦之第38屆機構與機器人學研討會(2014 ASME IDETC 研討會),發表研究論文獲選為當年度Freudenstein/General Motors Young Investigator Award

Professor Chin-Hsing Kuo and lab alumni Shao-Jung Lai received the Freudenstein/General Motors Young Investigator Award at The 38th Mechanisms and Robotics Conference in ASME 2014 International Design Engineering Technical Conferences (ASME IDETC 2014).

Awarded paper
Kuo, C.-H., Lai, S.-J., “Design of a Novel Statically Balanced Mechanism for Laparoscope Holders with Decoupled Positioning and Orientating Manipulation,” The 38th Mechanisms and Robotics Conference in ASME 2014 International Design Engineering Technical Conferences (ASME IDETC 2014), 17-20 August 2014, Buffalo, NY, USA.

2014 Best Paper Award from the 3rd IFToMM Asian MMS Conference

本實驗室研究成員參加2014年7月9-10日於中國天津舉辦之第三屆IFToMM亞洲機構與機器科學研討會(Asian MMS),兩篇投稿論文皆獲選為大會最佳論文獎!獲獎論文如下:

Our two papers received the Best Paper Award from the 3rd IFToMM Asian Conference on Mechanism and Machine Science held during 9-10 July 2014 in Tianjin, China. The awarded papers are:

  • Kuo, C.-H., Essomba, T., Li, G.-K., Wu, C.-T., Lee, S.-T., “Kinematic Optimization of a Novel Remote Center-of-Motion Mechanism for Robotic Craniotomy,” The 3rd IFToMM Asian Conference on Mechanism and Machine Science (Asian MMS), 9-10 July 2014, Tianjin, China.
  • Kuo, C.-H., Su, J.-W., “On the Configurational Isomorphism of a Reconfigurable Cube Mechanism,” The 3rd IFToMM Asian Conference on Mechanism and Machine Science (Asian MMS), 9-10 July 2014, Tianjin, China.


2014 MOST Excellent Young Investigator Research Grant

研究室主持人郭進星教授獲科技部103年度優秀年輕學者研究計畫之三年期研究補助,研究計畫名稱:「可變負載靜平衡式內視鏡扶持機器人之設計」。(2014/06/28)

Lab director Prof. Chin-Hsing Kuo received the 2014 Excellent Young Investigator Research Grant from Ministry of Science and Technology, Taiwan for his proposal entitled “Design of a Statically Balanced Robotic Endoscopic Holder with Variable Payload.” The awarded proposal will be funded for three years in an amount around 80,000 USD. (2014/06/28)

2014 First Prize of the Best Student Paper Award in NCAR 2014

吳炳煬同學於研討會晚宴受台灣機器人學會理事長李祖聖教授頒發獎狀

恭喜本實驗室碩士生吳炳煬同學投稿2014臺灣智慧型機器人研討會,獲大會頒發「最佳學生論文獎」第一名,獲獎論文為「運動全解耦並聯式機器人之順向運動與速度分析」 。(2014/06/07)

Congratulations to our MSc student Ping-Yang Wu who won the First Prize of the Best Student Paper Award at 2014 National Conference on Advanced Robotics held during 6-8 June 2014 in Taipei, Taiwan. His awarded paper is entitled “Forward Kinematics and Velocity Analysis of a Fully-Decoupled 4-DOF Parallel Manipulator.” (2014/06/07)



2014 BSc project student Hsuan-Ping Kuan received MOST Undergraduate Student Research Grant

恭喜本實驗室大學部專題生管軒屏同學獲103年度科技部大專生專題研究計畫補助,計畫名稱:「可調式腦神經外科手術大腦撐開器之設計」。(2014/05/31)

Congratulations to our BSc project student Hsuan-Ping Kuan for receiving the 2014 MOST Undergraduate Research Grant from the Ministry of Science and Technology, Taiwan for his project proposal entitled “Design of an Adjustable Neurosurgical Brain Retractor.” (2014/05/31)

2014 第十屆上銀機械碩士論文獎 科技大學特別獎

第十屆上銀機械碩士論文獎 科技大學特別獎

恭喜本實驗室畢業生賴紹榕獲頒第十屆上銀機械碩士論文獎科技大學特別獎,得獎論文為「新型被動式靜平衡腹腔鏡扶持器之設計」。(2014/03/22)

Congratulations to our lab alumni, Mr. S. J. Lai, received the Special Award of 2014 HIWIN Master Thesis Award with his thesis entitled “Design of a Novel Passive Statically Balancing Laparoscope Holder.” (2014/03/22)


【得獎作品介紹】與【頒獎典禮照片】

2013 CSME Merit MSc Thesis Award

恭喜本實驗室畢業生李高逵榮獲102年度中國機械工程學會碩士論文獎佳作,得獎論文為:「新型開顱手術機器人之運動設計」,頒獎典禮假第30屆中國機械工程學全國學術研討會(2013年12月7-8日,宜蘭縣宜蘭大學)舉行。(2013/12/20)

Congratulations to our lab alumni, Mr. Gao-Kuei Li, who received the 2013 Merit MSc Thesis Award of the Chinese Society of Mechanical Engineering (CSME, Taiwan) for his thesis entitled “Kinematic Design of a Novel Robotic Manipulator for Craniotomy.” The award ceremony was held during the 2013 National Conference of the Chinese Society of Mechanical Engineering on 6-7 December 2013 in National Ilan University, I-Lan, Taiwan. (2013/12/20)

2013 CSMMT Excellent MSc Thesis Award

陳學逸(左一)代蘇俊瑋領2013中華民國機構與機器原理學會傑出碩士論文獎

恭喜本實驗室畢業生蘇俊瑋榮獲2013年中華民國機構與機器原理學會傑出碩士論文獎,得獎論文為:「可重構方塊機構之重構分析」,頒獎典禮假第16屆全國機構與機器設計學術研討會(2013年11月1日,新竹市國立清華大學)舉行。(2013/11/04)

Congratulations to our lab alumni, Mr. Jyun-Wei Su, who received the 2013 Excellent MSc Thesis Award of the Chinese Society of Mechanism and Machine Theory (CSMMT, Taiwan) for his thesis entitled “Reconfiguration Analysis of a Reconfigurable Cube Mechanism.” The award ceremony was held during the 2013 National Conference on Mechanism and Machine Design on 1 November 2013 in Hsinchu, Taiwan. (2013/11/01)

2013 Taiwan Tech Best Project Award

許峯旗於畢業典禮受校長頒發101年度最佳專題獎

恭喜本實驗室大學部專題生修偉翔許峯旗黃晟瑜之研究專題「新型桌上型電腦螢幕支架靜力平衡機構」,獲頒國立臺灣科技大學101年度最佳專題獎,由校長於畢業典禮上親自頒獎。(2013/06/08)

Congratulations to our undergraduate project students, Wei-Xiang Shiou, Fong-Ci Syu, and Cheng-Yu Huang, winning the 2013 Taiwan Tech Best Project Award for their project entitled “A New Statically Balancing Mechanism for Desktop Monitor Stands.” (2013/06/08)

2013 機械業產學貢獻獎

台灣區機器工業同業公會徐秀滄理事長頒發機械業產學貢獻獎

實驗室主持人郭進星教授受百塑企業股份有限公司委託,執行「立式射出成型機肘節式合模機構之改良設計」產學合作計畫,成果獲頒台灣區機器工業同業公會2013機械業產學貢獻獎。(2013/03/28)

《機械資訊》雜誌報導

Dr. Chin-Hsing Kuo received 2013 Mechanical Industry-Academics Collaboration Award from Taiwan Association of Machinery Industry in recognition of his contribution for an industrial collaboration project with Multiplas Enginery Company. The awarded project aims at the improvement of a toggle mechanism used for vertical molding ejection machines. (2013/03/28)

2012 技職教育再造方案推動記者會

2012技職教育在造方案推動記者會:研習成果展示

教育部為展現各技專院校推動教師赴公民營機構研習計畫成果,於2012年11月12日辦理「2012技職教育再造方案推動成果記者會─業師深化實務教學 教師深耕實務研發」,安排特色案例共計4校參與教師、業界專家及企業代表來展現深化實務教學及深耕服務研習之成果,成功展現技職再造務實致用之精神。

本校(國立臺灣科技大學)郭進星郭東昊游進陽教授與華夏技術學院陳正劭教授等跨領域教師之研究團隊,於2011年暑期至信錦企業公司進行《薄型化電腦螢幕升降機構與高分子材料之應用》深度研習,進行電腦螢幕支架之設計實務經驗交流、並協助信錦企業解決現有問題。郭進星教授並將研習課題與開授之「創意性機構設計」課程結合,提供學生創意設計實務訓練,激勵學生創意思考與強化實務操作能力。本案執行成果豐碩,並獲選為本研習計畫之2012年特色案例。(2013/07/31)

記者會宣傳影片



2012 CSME Merit MSc Thesis Award

恭喜本實驗室畢業生連望甯榮獲101年度中國機械工程學會碩士論文獎佳作,得獎論文為:「內置超彈性纜線可彎曲圓管機構之運動分析」,頒獎典禮假第29屆中國機械工程學全國學術研討會(2012年12月7-8日,高雄市中山大學)舉行。(2012/12/10)

Congratulations to our lab alumni, Mr. Wan-Nin Lian, who received the 2012 Merit MSc Thesis Award of the Chinese Society of Mechanical Engineering (CSME, Taiwan) for his thesis entitled “Kinematic Analysis of a Superelastic-wire-embedded Flexible Tube Mechanism.” The award ceremony was held during the 2012 National Conference of the Chinese Society of Mechanical Engineering on 7-8 December 2012 in Kaohsiung, Taiwan. (2012/12/10)

2012 Award in Creative Bio-Medical Engineering Design Competition

邱威哲邱欣榆於2012全國生醫工程研討會展示得獎作品

恭喜本實驗室專題生邱威哲邱欣榆與研究生何惠雯參加2012年中華民國生物醫學工程創意競賽,榮獲「鐿鈦技術獎」,得獎作品為「ArthroTunneler™骨科韌帶肌腱縫合手術鑽孔引線器之改良設計」,頒獎典禮於2012全國生物醫學工程科技研討會(2012年11月17-18日,中壢市中原大學)舉行。(2012/11/22)

Congratulations to our undergraduate project students, W.-C. Chou and H.-Y. Chou, and master student, H.-W. He, who won the I-Tai Technology Award in the 2012 Creative Bio-Medical Engineering Design Competition in Taiwan. (2012/11/22)

2012 CSMMT Merit MSc Thesis Award

張隆裕學長獲頒優秀碩士論文獎

恭喜本實驗室畢業生張隆裕榮獲2012年中華民國機構與機器原理學會優秀碩士論文獎,得獎論文為:「可變拓樸機構之構造分解與同形判認」,頒獎典禮假第15屆全國機構與機器設計學術研討會(2012年11月2日,台南市南台科技大學)舉行。(2012/11/02)

Congratulations to our lab alumni, Mr. Lung-Yu Chang, who received the 2012 Merit MSc Thesis Award of the Chinese Society of Mechanism and Machine Theory (CSMMT, Taiwan) for his thesis entitled “Structural Decomposition and Homomorphism Identification of Mechanisms with Variable Topologies.” The award ceremony was held during the 2012 National Conference on Mechanism and Machine Design on 2 November 2012 in Tainan, Taiwan. (2012/11/02)

Honorable Mentioned Paper Award at ReMAR 2012

Our paper received the Honorable Mentioned Paper Award at the 2nd ASME/IFToMM International Conference on Reconfigurable Mechanisms and Robots (ReMAR 2012), 9-11 July 2012, Tiajin, China. (2012/07/13)

Awarded paper
Chang, L.-Y. and Kuo, C.-H., “On the Matrix Representation Methods for Variable Topology Mechanisms,” Advances in Reconfigurable Mechanisms and Robots I, Part 1, Springer, pp. 73-81. (Proceedings of the 2nd ASME/IFToMM International Conference on Reconfigurable Mechanisms and Robots, Tianjin, China, 9-11 July 2012) Publisher

2012 NSC Undergraduate Research Grant

恭喜本實驗室大學部專題生修偉翔同學獲國科會大專生專題研究計畫補助,計畫名稱:「桌上型電腦螢幕支架靜力平衡機構之設計與實作」。(2012/05/31)

Congratulations to our undergraduate project student, Wei-Xiang Shiou, who was awarded a National Science Council undergraduate research grant for his proposal “Design and Implementation of a Statically Balancing Mechanism for Desktop Monitor Stands.” (2012/05/31)